Best Short Tricks : Earlier, we had come up with various short trick for competition exams, hope you liked or enjoy that tricks. So, today we will remember too very easily. Candidates for all competitive exams, including UPSC, SSC, SBI, IBPS, MBA, and various State Government Exams, GK is one of the most crucial portions.  Such questions are often asked in examinations that which disease is caused by which reason.  Disease caused by bacteria  Disease caused by bacteria ( जीवाणु से होने वाले रोग) Trick:   पंडित का टीका न्यू है। प प्लेग डि डिप्थीरिया त टायफायड का कुष्ठ रोग टी क्षय रोग (टीबी / टिटनेस) का काली खांसी न्यू न्यू मोनिया है हैजा

SHEAR AND BENDING IN BEAMS 1. What is beam? Beam is a structural member which is supported along the length and subjected to external loads acting transversely (i.e) perpendicular to the center line of the beam. 2. What is mean by transverse loading on beam? If a load is acting on the beam which perpendicular to the central line of it then it is called transverse loading. 3. What is Cantilever beam? A beam one end free and the other end is free is called cantilever beam. 4. What is simply supported beam? A beam supported or resting free on the support at its both ends. 5. What is mean by over hanging beam? If one or both of the end portions are extended beyond the support then it is called over hanging beam. 6. What is mean by concentrated loads? A load which is acting at a point is called point load. 7. What is uniformly distributed load. If a load which is spread over a beam in such a manner that rate of loading is uniform through out the length then it is called as uniformly distrib...

  Question Bank of Geotechnical Engineering  (Slope Stability)  1. What is slide ? The failure of a mass of soil located beneath a slope is called a slide. 2. The causes for failure of slope. The action of gravitational forces, and Seepage forces within the soil. Failure due to undercutting of its foot. Failure due to disintegration n of the structure of the soil. 3. The types of slope. Infinite slope If a slope represents the boundary surface of a semi-infinite soil mass, and the soil properties for all identical depths below the surface are constant, it is called an infinite slope. Finite slope If a slope is of limited extent, it is called finite slope. 4. Basic types of failure of a finite slope. Slope failure Base failure 5. The types of slip surfaces or failure surfaces Planner failure surface Circular failure surface Non- circular failure surface 6. The method of analysis for stability of a finite slope Culmann's method of planner failure surface The Swedish circle ...

STRENGTH OF MATERIAL (DEFLECTION OF BEAMS) 1. What are the methods for finding out the slope and deflection at a section? The important methods used for finding out the slope and deflection at a section in a loaded beam are Double Integration Method Moment Area Method Macaulay's Method The first two methods are suitable for a single load, where as the last one is suitable for several loads. 2. Why moment area method is more useful, when compared with double integration? Moment Area Method is more useful, as compared with double integration method because many problems which do not have a simple mathematical solution can be simplified by the ending moment area method. 3. Theorem for Conjugate Beam Method? Theorem I: The slope at any section of of a loaded beam, relative to the original axis of the beam is equal to the shear in the conjugate beam at the corresponding section Theorem II:  The deflection at any given section of a loaded beam, relative to the original position is equal ...

  Question Bank of Paint 1. What is paint? Paint is a liquid surface coating which protect the surface from the weathering action of atmospheric agencies and provide a decorative finish. 2. What are the ingredients or the compositions of paint. Paint consists of : Base Vehicle Pigments  Solvents  Driers  Adulterants. 3. Write short note of ingredients of paint?  Base: It is the principal constituent of the paint, usually a metallic oxide. It makes the paint film opaque and possesses binding properties. Eg: White lead, Red lead, Zink white, Alumunium powder, Iron Oxide Vehicle: It is also known as binder. Vehicle is an oil to which holds the constituents of paint in suspension and helps to spread it over the surface to be painted.  It imparts durability, Toughness, water proof ness to the paint film, resistance to weathering, glossy finish to the painted surface and forms the body of the paint.  Eg: Linseed oil, Nut oil, poppy oil, Tung oil etc. Pigment...

  Question Bank of Design of Steel Structural 1. What are the various types of connections used for connecting the structural members? Riveted connections Bolted connections Pin connections Welded connections 2. Define nominal diameter of rivet. It is the diameter of the rivet shank.  3. Define gross diameter of rivet. It is the diameter of the rivet in the hole, measured after driving.  It is taken equal to the diameter of the rivet hole. Gross diameter = Nominal diameter + 1.5 mm, ϕ ≤   24 mm.  Gross diameter = Nominal diameter + 2.0 mm,  ϕ > 24 mm. 4. What is meant by gauge distance and edge distance? Gauge distance is the perpendicular distance between two adjacent gauge lines. This is also called as back pitch.  Edge distance is the distance of the edge of the member or the cover plates from the Centre of extreme rivet hole. Or it is the distance between the Centre of the outermost rivet and nearest edge of the member or cover ...