Does 01 year apprenticeship training will count as a work experience? I know, many student have this doubt that whether apprenticeship training will count as a work experience or not ? and it should be. So let me tell you today and clear your doubt about apprenticeship training count as a work experience . W ell, when I also completed my apprenticeship training, I had also this doubt in my mind. Then I searched and read about it many places and finally I got the proof of apprenticeship training will count as a work experience. My finally answer is YES apprenticeship training will count or consider as a work experien ce. I share with you the proof this. Click Here (Go to http://portal.mhrdnats.gov.in > Help > Process Manual (English) > Page No. 16 > Benefits to students > Point No. 10) Note:- The apprentice which is under the Ministry of Skill Devlopment & Entrepreneurship, in which the All india ...
Cross Staff
A mechanical tool called a cross staff is used to calculate the angle between two objects.
The cross staff was historically employed by surveyors who wanted to be able to take precise measures as well as by astronomers who were studying the sky to help sailors orient themselves.
Cross Staffs are three forms, namely.
- Open Cross Staff
- French Cross Staff and
- Adjustable Cross Staff
1: Open Cross Staff:
- The open cross staff is the simplest form of cross staff.
- The head is simply a wooden block octagonal or round about 15 cm side.
- diameter and 4 cm deep with two fine saw cuts at right angles to each other.
- Open cross staff is used for setting out right angle at a given point on the chain line.
2: French Cross Staff:
- The French staff is consists of an octagonal tube brass having eight slits on all sides.
- Illustrates the octagonal form of cross staff.
- French cross staff is used to set out an angle of 45 degree or 90 degree.
3: Adjustable Cross Staff:
- The adjustable cross staff consists of a brass cylindrical tube about 8 cm in diameter and 10 cm deep and is divided in the center.
- The upper cylinder can be rotated relative to the lower one by a circular rack and pinion arrangement actuated by a milled headed screw. Both are provided with sighting slits.
- The lower part is graduated to degrees and subdivisions, while the upper carries a vernier.
- Adjustable cross-staff is used for setting out angles of any magnitude.
- Stipend Based Internship Training Click here
- Free online learning Training Program Click here
- Auto cad Course Click here
Stipend Based Internship Training Click here
Free online learning Training Program Click here
Auto cad Course Click here
- Training for Diploma or Degree Holder Click here
- Apprenticeship Training Click Here
Training for Diploma or Degree Holder Click here
Apprenticeship Training Click Here
Comments
Post a Comment