Does 01 year apprenticeship training will count as a work experience? I know, many student have this doubt that whether apprenticeship training will count as a work experience or not ? and it should be. So let me tell you today and clear your doubt about apprenticeship training count as a work experience . W ell, when I also completed my apprenticeship training, I had also this doubt in my mind. Then I searched and read about it many places and finally I got the proof of apprenticeship training will count as a work experience. My finally answer is YES apprenticeship training will count or consider as a work experien ce. I share with you the proof this. Click Here (Go to http://portal.mhrdnats.gov.in > Help > Process Manual (English) > Page No. 16 > Benefits to students > Point No. 10) Note:- The apprentice which is under the Ministry of Skill Devlopment & Entrepreneurship, in which the All india level exam (AITT) is done after doing the apprenticeship tr
Sextant
- The boX sextant instrument diameter is about 7.6 cm.
- It is a hand instrument used to measure approximate angles between any given stations.
- The box sextant has no telescope, and have a general appearance.
- Sextant only provides the angles in the plane of the instrument so that if the observed stations are not on the same Level than the angle will be as a direct angle between them instead of horizontal angle such as would be given by a theodolite.
Testing And Adjusting The Box Sextant
There is no provision to adjust the index glass, but the horizon glass is provided with the two movements required for both the adjustments detailed below.
1. To set the horizon glass perpendicular to the plane of the instrument, the following test procedure is used.
a) The index is set to zero,
b) Any distant terrestrial object or the sun is then sighted directly and by reflection, checking to see if they agree or if there is any lateral displacement.
2. To eliminate the index error so that the 6 reads zero when the horizon and index glasses are parallel, the following test procedure is used.
a) The vernier is set to read Zero
b) Any distant object or the sun is then sighted directly and by reflection and is checked if there is any lateral displacement.
- Stipend Based Internship Training Click here
- Free online learning Training Program Click here
- Auto cad Course Click here
Stipend Based Internship Training Click here
Free online learning Training Program Click here
Auto cad Course Click here
- Training for Diploma or Degree Holder Click here
- Apprenticeship Training Click Here
Training for Diploma or Degree Holder Click here
Apprenticeship Training Click Here
Comments
Post a Comment